#

Set Up

  • Switch on the Mac (password: LovingLife1!)

  • Log into Clarity - select most recent show file

  • Log into Pro Presenter

  • Fade up GM fader

  • Plug in haze machine - top up fluid if needed

  • Switch on all four movers (And ceiling hung rogues with remote)

  • Test front wash, back wash, haze and movers/LED states by sliding up the faders to 100%

  • Open Elvanto, Telegram and Teamspeak

#

Troubleshooting

  • Front and back wash
    • Check GM is at 10

    • Check dimmer rack

    • Check kill switch in Clarity

  • LED Strips
    • Check dimmer rack

    • Check Clarity kill switch

  • Rouge movers

    • Check kill switch

    • Ensure haze is plugged in

    • Check lamp is switched on on the fixture

    • Turn fixtures off and on again

  • LED Screens

    • Check all panels have power

    • Check box under the sound desk is set at 15% brightness

#

SAVE YOUR WORK!

#

Cues Pre-service

  • Pre-service = House lights start at white 70% (60% at night)
  • Countdown starts = switch on haze on fill
  • 60 secs to go (song changes) = fade house lights to blue (70%)
  • End of countdown = fade front and back wash to roughly 60% as soon as the song leader starts speaking
#

Cues within Praise & Worship

  • Cue for first song = change to your first cue in the list
  • Second song = fade house lights to 40%
  • Third song = fade house lights to 30%
#

Cues within the Remainder of the Service

  • Build Faith & Pray
    • Activate rouge mover kill switch or stop movement of moving lights
    • Kill haze
    • Ensure front and back was are at 60%
  • Hosting (wait for PD Cue)
    • Change to "Welcome" preset
    • Change houselights to white and 70%
  • Life News (As soon as host throws to the screens)
    • Fade front and back wash to 0%
    • Select Life News cue
    • Fade house lights to 40%
  • Preaching = same as Hosting (with message theme)
#

Pack Down

  • 10-15 minutes after the service, turn on fluros

  • Fade all faders to 0%

  • Fade GM fader to 0%

  • Click ‘release all’ in Clarity

  • Save your work

  • Click ‘clear all’ in ProPresenter

  • Exit both programs

  • Shutdown Mac

  • Cover monitor with black cloth

  • Switch off all Rogue movers manually (and roof Rogues with remote)

  • Unplug haze

  • Leave the production desk clean and tidy

#

Praise vs Worship - What's the Lighting Difference?

Praise

Upbeat and vibrant
Build energy
Snappy transitions between cuelists
Design revolves around song structure (verse, chorus, drop etc)
Flash and movement effects are encouraged (obviously not strobe though)

Worship

Simple, calming and reverent
Build atmosphere
Slow, gentle transitions
Design revolves around mood of song (low, mid, high etc)
Minimal movement - no flash effects